FULAN OPTICS MACHINE CO., LTD.
Products Category
Contact Us
Name: David
Tel: +86-25-84620580
Fax: +86-25-84529611
Mobile: +86-15335180795
E-mail: sales@opticsmachine.com
Add: No.39, Xin Zhuang,Longpan Road, Nanjing 210037,P.R.China
Tel: +86-25-84620580
Fax: +86-25-84529611
Mobile: +86-15335180795
E-mail: sales@opticsmachine.com
Add: No.39, Xin Zhuang,Longpan Road, Nanjing 210037,P.R.China
Products
Glass Cylindrical Grinding Machine (Numerical control) |
|
|
|
Product name：Glass Cylindrical Grinding Machine (Numerical control) |
|
Item：RM350 |
|
Details： |
|
Application: For cylindrical grinding glass,ceramic,crystal,silicon,magnetic rod and other brittle materials.
Features: 1.The machine adopts high-speed rotating diamond cup wheel and low-speed (stepless) rotating workpiece spindle,using one stepper motor to make longitudinal feed. 2.Except the loading/unloading glass blank and cross traverse feed are manual operation, the longitudinal table feed and diamond cup wheel/ workpiece spindle rotating are automatic operation. 3.The cup wheel/ workpiece spindle rotating, longitudinal table feed, coolant liquid supply and machine stop working are all automatic. It is with high efficiency for middle/ mass production.This machine is with a fog absorbing device. 4.Based on the use of precision casting mold and two times to removal stress. The guide rails are high precision and stability. 5. The turning angle processing way of grinding wheel is high efficiency and good stability. 6.The stepper motor drives ball screws to make worktable right/left moving.It can realize micro feed.It is high precision and convenient. 7.The speeds of workpiece spindle is frequency.It is conversion controlled.The adjustments are direct and convenient. 8. Positioning tailstock is lengthened and widened. The support area between bed and tailstock is enlarged. Since the tailstock is without front and back moving, it ensures the tailstock to move any position. After locking the tailstock, the precision locking does not change at the same time. Technical Data: Working range: workpiece diameter (or diagonal): 50mm - 350mm workpiece length: Max.200mm Workpiece spindle speed: 20-140rpm (stepless) Grinding spindle speed: 8400rpm Grinding spindle setting angle: Max.45 ° Diamond wheel diameter: 75mm Worktable speed (workpiece feeding speed): 10-1000mm/min Power Requirement: 2.7KW Space Requirement: 1800×1000×1400mm Weight: 1500kg Note: The machine can be designed and produced according to buyer’s requirements. |
|
 |
[Next：RM15]→ |
| Related Products : |
Home | About Us | Products | News | FAQ | Feedback | Contact Us | SiteMap
Copyright (c) FULAN OPTICS MACHINE CO., LTD. All Rights Reserved
